Advantages of wood plastic:

The popularity of wood plastic flooring is higher and higher, and the utilization rate is higher and higher. Many Party A's design drawings have clearly indicated the words of using wood plastic flooring. The corresponding amount of the original anti-corrosion wood floor is squeezed a little. Both wood plastic floor and anti-corrosion wood floor have a wooden word. What's the difference between them?

First, the installation loss of wood plastic profile is less than that of anticorrosive wood. Under the same construction area or volume, the loss of wood plastic is less than that of anticorrosive wood. Because wood plastic is a profile, it can produce materials close to the required length, width and thickness according to the actual size needs of landscape engineering. The length of anti-corrosion wood is specified to be dead, generally 2 meters, 3 meters and 4 meters, which can not be flexible according to the terrain.

Second, the surface of wood plastic floor has been treated before leaving the factory, and there is no need to do paint treatment. Generally, the wood surface shall be painted or painted with water-based paint after the construction of anti-corrosion wood or during the construction process.

Third, the wood plastic floor can basically be maintenance free, which is a very good advantage, which is determined by the characteristics of the wood plastic itself, because the wood plastic floor itself is an integral material in the molding process. Even if you grind off the surface layer, the material of the inner layer is still the same as that of the surface layer. Due to the environmental temperature, humidity and ultraviolet radiation of the sun, the anticorrosive wood generally needs to be maintained or painted within one year. In the long run, the maintenance cost of wood plastic is far lower than that of anti-corrosion wood products.

Fourth, wood plastic can win more with less under the same construction conditions. Generally, when the outdoor floor is paved with wood, it needs wood with a thickness of about 45mm. Wood plastic only needs 25mm thick materials, and its strength exceeds 45mm anti-corrosion wood. In other words, if the use of wood is 1 cubic meter, then wood plastic only needs about 0.5 cubic meters.

Fifth, wood plastic is a new type of profile, with many hollow specifications. Save a lot of materials. We all know that aluminum alloy doors and windows can be popularized so quickly because they are hollow profiles. If they are solid, the price is incredibly high. Wood plastic hollow part saved, although not as high as aluminum alloy, but it is also more objective. As we all know, hollow can not only reduce weight and increase strength. Wood plastic can be hollow, while anti-corrosion wood is impossible.

Sixth, the green concept of wood plastic flooring composite energy conservation and environmental protection. The demolished wood plastic can also be recycled and reused to reduce resource consumption, which is in line with low-carbon economy. The preservative wood needs to consume a lot of high-quality wood.

Seventh, generally speaking, the service life of high-quality wood plastic flooring products is much longer than that of anticorrosive wood. Generally, it can reach several times of ordinary wood. Foreign data even show that wood plastic can be used for 20-40 years.

Eighth, wood plastic flooring materials can not do their own structural support, and need to be firmly bonded to the ground or steel support. The thicker anticorrosive wood can be supported by itself.